TechniSat TechniStar S2 - Manual (Page 18)

You can also highlight the individual menu items in the same way as you highlight an
item on a submenu to open it and alter the respective settings.
The menu items in some menus have to be highlighted by moving sideways. This is
done by pressing the right/left arrow keys.
In some menus you can move the highlight upwards/downwards from line to line using
the up/down arrow keys and sideways by using the right/left arrow keys
You will see the so-called menu path in the uppermost line of the menu screen. This
shows you the menu you are currently in and the path you took to reach it. In the
example shown this is Main menu > Settings > Picture settings. The menu
path is also shown throughout the instruction manual and shows you how you can
reach the respective menu with the settings described.
If the blue function key (Help) is displayed in the bottom line on the screen, a help
page can be displayed by pressing this button and hidden by pressing it again.
6.3 Accepting settings / Exiting menus and functions
In some menus and functions the changes made must be accepted manually in order to
save them permanently. If this does not happen, the function or the values that existed
before the change was made will be reset automatically on exiting the menu.
If an Accept field or the green function key with Accept is displayed in the bottom
line of the screen, you can see that the changes made must be saved manually to be
accepted.
> By highlighting Accept using the right/left arrow keys and confirming with the
OK button or by pressing on the green function key Accept, the changes are saved
and you return to the next menu level up.
Alternatively:
> Press the Return button.
A request appears asking whether the changes you made should be applied.
> Use the right/left arrow keys to highlight Yes or No and confirm your selection
by pressing the OK button.
Changes will now be saved or discarded according to your selection and you move
back to the next menu level up.
18