TechniSat TechniStar S2 - Manual (Page 28)

Teletext group Teletext block
> Use the numeric keys to enter the teletext page you want. Your entry will appear in
the upper left corner of the screen.
After you have entered the teletext page you want, your device will search for it. As
it is not possible to transfer every teletext page at the same time, it may be a few
seconds before your receiver finds the page and displays it on the screen.
With all teletext operators, the home page is page 100.
> Use the red or green buttons to move forwards or backwards one page at a time.
> Press the yellow function key to call up the teletext group indicated in the yellow
field.
> Press the blue function key to call up the teletext block indicated in the blue field.
7.10.2.1 Displaying subpages
If teletext subpages are available for a selected teletext page, an indicator showing that
subpages have already been downloaded appears on the left next to the teletext. As soon
as a new subpage is available, this is automatically displayed.
> Use the OK button to show a specific subpage.
The column on the left side of the screen is enabled. Subpages that have already
been acquired are displayed.
> Use the up/down arrow buttons to select the subpage you want.
> You can exit the display of specific subpages by pressing OK.
7.10.2.2 Stop mode
> Pressing the Freeze frame button displays the word Stop in the top left corner of
the teletext window.
This prevents teletext subpages from automatically scrolling forwards.
> Press the Freeze frame key again to switch the stop mode off again.
7.10.2.3 Mixed viewing mode
> Pressing the Teletext button again enables mixed viewing mode. This means that
the teletext is superimposed on the TV picture.
28