TechniSat TechniStar S2 - Manual (Page 26)

7.5 Receiving encrypted channels
Your receiver is equipped with an integrated CONAX encryption system (smartcard reader)
and a Common Interface for accepting a CI / CI+ module. This enables you to receive and
view encrypted channels. To do this, you must first either insert a CONAX Smartcard into
the integrated card reader, or insert a CI / CI+ module with a valid Smartcard into the slots
provided.
> Insert the CONAX smartcard into the card slot in the integrated card reader. (gold-
coloured chip facing down, and in the direction of insertion).
or
> Insert a CI / CI+ module into the slot.
> Insert the smartcard into the CI / CI+ module card slot. Ensure that the gold-coloured
chip on the smartcard is facing upwards, in the direction in which the card is inserted.
If you now select an encrypted channel, the digital receiver will automatically check the card
reader and the CI / CI+ slot and will display the channel in decoded form, assuming a valid
smartcard and an appropriate CI / CI+ module with a valid smartcard has been inserted.
7.6 Volume control
You have the option of adjusting the volume on your digital receiver. This facilitates operation
of the receiver, as it means you can access all the major functions on a single remote control,
and will only rarely have to resort to using the remote control for the TV. When you switch on
the digital receiver, sound will be reproduced at the volume level last set.
> You can increase the volume for your digital receiver using the right arrow key on
the receiver or the Volume + button on the remote control, and reduce it using the
left arrow key on the receiver or the Volume - button.
Please note that the volume control and mute button also adjust or mute the digital
audio outputs (not with the bitstream setting).
7.6.1 Using mute
> To switch the sound off (mute), press the Sound on/off button - press the key again
to switch the sound back on.
Throughout the time that the volume is switched to mute, the symbol appears at
the upper right of the screen.
7.7 Selecting a different language / sound option
If a programme is broadcast in multiple languages or with multiple sound channels, this is
indicated in a message.
You can then set a different language or another audio channel as follows:
> Press the Language selection button.
A list of the languages currently being broadcast is displayed on the screen.
26