TechniSat TechniStar S2 - Manual (Page 33)

However, it is often the case that the selected programme starts either earlier or later than
stated. If so, either the beginning or the end of the programme being recorded is missing.
To avoid this problem, you can enter a timer pre-roll time/post-roll in one minute increments. The
timer will now start earlier and finish later than in the EPG data by the pre-roll time/post-roll times
entered.
> To access the timer overview, first call up the Main menu by pressing the Menu key.
> Use the up/down arrow keys to highlight the Timer Organiser item and confirm
with OK.
> Use the up/down arrow keys to highlight the Timer Settings item and confirm
by pressing OK again.
The Timer Settings submenu appears.
7.15 Selecting a function
> Press the blue function key to open the navigation menu (NAV Menu).
> Use the up/down arrow buttons to highlight the function you want to access.
TV TV mode: playing TV programmes.
Radio Radio mode: playing radio programmes.
Film/DVR Film/DVR Navigator: access MPEG2 titles, VOB, TS or TS4 files stored
on a device connected to the USB port.
Music Music navigator: access MP3 titles stored on a connected USB device
or a shared network drive.
Pictures Pictures navigator: access JPG files stored on a connected USB device
or a shared network drive.
> Confirm with OK to select the highlighted function.
33