Toa RM-971 - Manual (Page 27)

27
8. INSTALLATION
8.1. Notes on Panel Installation •
Install the control panel (EP-059R and EP-029) so that all of its keys may be positioned at a height of 0.8 - 1.5 m from the fl
oor.
•
When mounting individual panels in the remote control unit wall mounting cabinet (CR-092R, etc.), mount the terminal block asse
mbly to the cabinet.
When installing individual panels in equipment rack or case other than the wall mounting cabinet, install the terminal block as
sembly in the designated
position on the EP-059R's rear panel.
The figure shows the RM-971-330.
Under 1,500 mm
179 mm 89 mm 89 mm 89 mm 89 mm Over 800 mm
Floor surface
Installation position of terminal block assembly (supplied with EP-059R)
Installation position of terminal block assembly (supplied with EP-059R)
(EP-059R's rear panel)
(Wall mounting cabinet)