Triner Scale VP-70 Manual - Manual (Page 11)

Page 3-4
Zero Scale - This key is used to zero out the weight display.
Print - This key is used to send weight information out to the serial port. It is also
used to print and dispense a postage label when connected to a compatible
Postage Meter.
Auto Hold - This key is used to enable or disable the automatic weight hold
mode.
F1 – This key allows you to access the following functions:
• System Information
• Rate Table Information
• Price Categories (USPS Retail or Commercial). To change price categories
see section 5.7.
• Scale Configuration Menu
• Scale Service Menu
F2 - This key allows you to access the following functions:
• Manual Meter Value Entry (Used in conjunction with a postage meter)
• Adjust Price (rate) Entry
• Zip Code or Country Code Edit
• Manual Weight Entry
• Piece Counting Mode
• Remote Scale
3.2.3 NUMERIC AND SHORTCUT KEYS
The numeric keys are used to enter information into the scale when prompted.
They are also used as programmable Shortcut keys to save keystrokes (see sec-
tion 5.1 for more information on creating and using Shortcuts).
FIGURE 3-9: Numeric Keys Layout
The CLEAR key performs many useful and intuitive functions.
• Press and Hold the CLEAR key at any time to return to the Home Screen.
• Use the CLEAR key to return to the previous soft key screen level
• When entering data, use the CLEAR key to clear the current entry
• Use the CLEAR key to clear all special services selected at once
The ENTER key is used to accept and confirm a selection or entered data.