Triner Scale VP-70 Manual - Manual (Page 23)

Page 5-6
4. Press the SUBTRACT soft key.
5. When prompted key in the amount to be subtracted and press the
ENTER key.
6. The amount will be subtracted from the rate and SP will be displayed
indicating postage has been subtracted.
5.9 MANUAL METER SETTING
The manual meter feature is used to set a postage meter to a value determined by the
user. This feature will only work if a postage meter is attached to the scale.
1. Remove any items from the scale and make sure the weight displays Zero. If
it doe not read Zero, press the ZERO SCALE key.
2. Press the F2 key.
3. Press the MAN METER soft key.
4. When prompted key in the postage amount and press the ENTER key.
5. The scale will send the amount to the postage meter.
• A postage rate must be displayed before using the ADD/SUBTRACT postage function. If
the rate is not displayed before using the function the message “Adjust Postage not
Available” will be displayed.
• If the amount to be subtracted is greater than the base rate, the message “Postage over
rate” message will be displayed.
• If the scale is not on Zero before Manual Price is selected, the scale will display the
message “Scale not empty”.
• If there is not a postage meter attached to the scale when Manual Price is selected, the
scale will display the message “Meter Unavailable”.