Triner Scale VP-70 Manual - Manual (Page 26)

Page 6-3
6.1.6 How to view System Information
The system information function is used to display general information about the
scale and its settings. The information displayed is as follows:
• Scale Model Number
• Serial Number
• Capacity
• Origination Zip Code
• Time
• Date
1. Press the F1 key.
2. Press the SYS INFO key.
3. The scale will display information about the scale.
4. Press the SCREEN DOWN key to view the current time and date.
5. Press CLEAR key to exit.
6.1.7 Latitude Zone (Factory Use Only)
The Latitude Zone adjustment allows for Gravity Compensation when the scale is
set in a High Resolution Mode. By default this feature is turned off at the factory.
To enable gravity compensation the scale must be re-calibrated.
6.1.8 Load Rate Function (Future Use)
The Load Rate function is used to make the scale ready to accept a PC
download of new postal rates.