Triner Scale VP-70 Manual - Manual (Page 24)

Page 6-1
6.0 SETUP OPERATIONS
The system setup consists of three areas: Configuration, System Information and
Service.
6.1 CONFIGURE MENU
The Configure Menu is used to access or set up the following functions:
• Origination ZIP code
• Program F2 Key
• Beeper Setup
• Time / Date Setup
• Home Screen Default
• Latitude Zone
• Load Rate
6.1.1 How to change the Origination ZIP Code
In order to calculate the proper postage rates, the scale needs to know the ZIP
Code from which the item will be mailed or shipped; this is called the Origination
Zip Code. It should have been programmed when you first received the scale,
however it can be changed if needed.
1. Press the F1 key.
2. Press the CONFIGURE soft key.
3. Press the ORIG ZIP soft key.
Scale displays the current origination ZIP code and prompts you to enter in
the new one
4. Key-in the first three digits of the new origination ZIP code
Scale reverts back to Configure screen; press the CLEAR key to return to
normal operating mode
6.1.2 How to configure the F2 key menus
The F2 key can contain up to six (6) functions, which will appear on the soft key
menu. The user can program the functions to be used. Out of the box five
functions already appear:
• Piece Counting (Counting)
• Manual Weight Entry (Man Wt)
• Change ZIP/Country (Zip/Cntry)
• Manual Price (Man Price)
• Adjust Price (Adj Price)
The correct Origination Zip Code must be programmed into the scale. If the
wrong Origination Zip Code is entered into the scale, it will not properly calculate the zip-to-
zone. This can result in incorrect postage rates.