Triner Scale VP-70 Manual - Manual (Page 25)

Page 6-2
1. Press the F1 key.
2. Press the CONFIGURE soft key.
3. Press the F2 SETUP soft key.
Scale displays the available functions along with the status, i.e. ON or OFF.
For example, ManWt – ON means that the Manual Weight function is turned
ON.
4. Press the soft key next to the function you wish to turn ON or OFF
The status of the function changes from ON to OFF or from OFF to ON
5. Press the CLEAR key to exit and save the changes.
6.1.3 How to configure the Beeper
The audible beeper beeps each time a key is pressed and is very useful for sale
operation; however it can be disabled.
1. Press the F1 key.
2. Press the CONFIGURE soft key.
3. Press the BEEPER soft key.
4. Press the ON or OFF soft key then press ENTER.
5. Scale reverts back to Configure screen; press the CLEAR key to return to
normal operating mode.
6.1.4 How to set up the Time and Date
The VP-70 includes an internal clock. Follow the instructions below to set the
time and date.
1. Press the F1 key.
2. Press the CONFIGURE soft key.
3. Press the TIME/DATE soft key.
4. Key in the current date (Day, Month, Year).
5. Key in the current time (Hours, Minutes, Seconds).
6. Press ENTER to accept and save the changes.
To view the current time and date use the System Information Function.
6.1.5 How to configure Home Screen Default
The scale is factory set up to automatically return to the Home Screen each time
an item is removed from the scale. This can be changed to remain on the last
Class of Mail used when an item is removed.
1. Press the F1 key.
2. Press the CONFIGURE soft key.
3. Press the SET HOME soft key.
4. The scale will display the question “Home Screen Default?”
a. To make the scale automatically return to the home screen, press
YES.
b. To make the scale remain on the last Class of Mail used, press NO.
5. Press the CLEAR key to exit and save the changes.