Triner Scale TMU-295 - Manual (Page 37)

Reference Information 4-5
Printing position
Notes
1. The mechanical form stopper is adjustable in the range 26.5 to
36.5 mm (1.04 to 1.44”).
2. The TOF and BOF sensors are fixed and cannot be adjusted.
3. After slip paper is set at the mechanical form stopper, the top
margin can be shortened up to 21.2 mm (.83”) by feeding the
paper backwards (ejection feeding).
4. When ejection feeding is not performed after printing, printing
can be performed up to the position at which the paper edge is
no longer held by the paper feed roller (13.8 mm (.54”) from the
paper edge).
5. When ejection feeding is performed after printing, the paper
can be fed forward up to 11.8 mm (.46”) (28 dots) after the
bottom edge is detected.
Last printing position Paper feed roller
NOTE 2. BOF sensor (fixed)
NOTE 2. TOF sensor (fixed)
NOTE 1. Mechanical form stopper
First printing position
65.84 (2.59")
Printing position at minimum top margin
12.5 (.49")
Reverse paper feed Forward paper feed
Adjustable
12.5 (.49")
5 (.20")
NOTE 4. 13.8 (.54") NOTE 5. 15.5 (.61")
NOTE 3. 5.3 (.21")
27.3 (1.07")
2.3 (.09") 10 (.39")
26.5 (1.04")