Triner Scale TMU-295 - Manual (Page 62)

5-22 Commands
Decimal 27 99 53 n
[Range] 0
≤
n
≤
255
[Description] Enables or disables the panel buttons.
• When the LSB of n is 0, the panel buttons are enabled.
• When the LSB of n is 1, the panel buttons are disabled.
[Notes] • When the panel buttons are disabled, none of them are usable
when the printer cover is closed.
[Default] n = 0
ESC d n
[Name] Print and feed n lines
[Format] ASCII ESC d n
Hex 1B 64 n
Decimal 27 100 n
[Range] 0 ≤ n ≤ 255
[Description] Prints the data in the print buffer and feeds n lines.
[Notes]
• This command sets the print starting position to the beginning of
the line.
• This command does not affect the line spacing set by ESC 2 or
ESC 3.
[Reference] ESC 2, ESC 3
ESC e n
[Name] Print and reverse feed n lines
[Format] ASCII ESC e n
Hex 1B 65 n
Decimal 27
101 n
[Range] 0
≤ n ≤
255
[Description] Prints the data in the print buffer and feeds n lines in the reverse
direction.
[Notes] • The command is available only in standard mode.
• This command sets the print position to the beginning of the line.
• The setting values do not remain.
ESC f t1 t2
[Name] Set cut sheet wait time
[Format] ASCII ESC f t1 t2
Hex 1B 66 t1 t2
Decimal 27 102 t1 t2
[Range] t1 = 0
0
≤
t2
≤
64