Cvc 2000 – VACUUBRAND PC 2001TE VARIO User Manual
Page 11
page 11 of 50
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. manual-no.: 99 91 35 / 11/04/2008
Keys
• pressure setting (only vacuum control)
• adapting process pressure
• setting of frequency
• setting time for switch-off (only VACUU•LAN)
• switching (toggling) in modes
start or stop of process control or
confirmation of selected values or mode
operating air admittance valve
(only if valve is connected and
preselected)
MODE
START
STOP
VENT
p
Rear side
CVC 2000
• switch on/off automatic mode (only vacuum control)
• special function (in combination with another key)
connection pump
supply
mains switch
connection mains
cable
female connector to connect
pump electronics
female connector to connect a cooling
water valve and/or an air admittance valve
serial interface
RS 232 C
female connector
to connect the gauge
head VSK 5
CVC 2000
II