General view modes, Cvc 2000, Ready to start – VACUUBRAND PC 2001TE VARIO User Manual
Page 17
page 17 of 50
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. manual-no.: 99 91 35 / 11/04/2008
CVC 2000
II
setting pressure unit (mbar / Torr / hPa)
configuration of the cooling water valve if applicable
setting mode
ready to
start
mode ”vacuum control”
(factory set)
controller controls
-
pump according to preset pressure value or in automatic mode
-
cooling water valve (optional)
-
air admittance valve (optional)
mode ”VACUU•LAN”
controller controls
-
pump according to preset pressure and time values
-
cooling water valve (optional)
-
air admittance valve (optional)
General view modes
mode ”continuous pumping”
controller controls
-
pump according to preset pumping speed
-
cooling water valve (optional)
-
air admittance valve (optional)
configuration of the air admittance valve if applicable