Accessories – VACUUBRAND PC 620 NT User Manual
Page 48
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. Manual-no.: 999188 / 19/05/2009
☞
To connect a VMS Module A to a NT pumping unit remove
the plug at the lower side of the terminal box of the pump-
ing unit and connect pump using the connection cable IEC
plug- IEC socket to VMS.
Accessories
VMS module A, 100-230 V, 3.5 A, CEE ........................................................................................676001
VMS module A, 100-230 V, 3.5 A, UK ..........................................................................................676002
VMS module A, 100-230 V, 3.5 A, CH ..........................................................................................676003
VMS module A, 100-230 V, 3.5 A, US ..........................................................................................676004
The 2x5 pole connection cable and the country specific adapter cable (included in the VMS Module A
set) are not necessary for pumping units NT but:
VMS adapter cable.......................................................................................................................636655
(to connect Vacuum Management System VMS Module A to CVC 3000)
Connection cable IEC plug- IEC socket ......................................................................................636466
(to connect Vacuum Management System VMS Module A to NT pumping unit)
Vacuum gauge head VSK 3000, capacitive Al
2
O
3
sensor 1080-0.1 mbar ...................................
636657
Coolant valve VKW-B, 24 V= .......................................................................................................674220
Air admittance valve VBM-B / KF 16 / hose nozzle 6/10 mm, 24 V= ..........................................674217
Y-type adapter VACUU•BUS ........................................................................................................636656
Extension cable VACUU•BUS, 2m .............................................................................................612552
Wall bushing VACUU•BUS ..........................................................................................................636153
Cable RS 232C, 9-pole, Sub-D .....................................................................................................637837
Level sensor (control of liquid level in catchpots) ...................................................................... 699908
Exhaust waste vapour condenser Peltronic .............................................................................699905
Silencer (with connection hose)....................................................................................................636588
Upgrade kit SYNCHRO to two inlets at PC 510/610 NT .............................................................699920
Adapter G 1/4 to PTFE tubing 10/8 mm, for inlet of PC 511/520/611/620 NT .............................677060
Small flange KF DN 16 for assembly at inlet of PC 511/520/611/620 NT ..................................662593
Seal ring for small flange KF DN 16 (662593)............................................................................3120565
Hose nozzle DN 6/10 mm, for inlet at PC 511/520/611/620 NT ..................................................642470
Modification kit for small flange KF DN 16, at inlet of PC 510/610 NT .................................699939
Hose nozzle DN 6/10 mm, at inlet PC 510/610 NT .....................................................................636635
Elbow piece (90°) for PTFE tubing DN 10/8 mm, at inlet of PC 510/610 NT ............................637873
Blind flange (C1) for assembly at valve block or distribution head ..............................................677136
Flow control diaphragm (C2) for assembly at valve block or distribution head ..........................677137
Solenoid operated valve (C3-B) for assembly at valve block or distribution head ......................636668
Manometer module(C5) for assembly at valve block or distribution head ...................................677100
PTFE tubing DN 10/8 mm (sold by meter) ...................................................................................638644
Attention: Dust-laden gases, deposits and condensed solvent vapour can restrict air flow out the si-
lencer. The resultant back pressure can lead to damage of pump bearings, diaphragms, and valves.
Under those conditions, a silencer must not be used.