VACUUBRAND MV 2 VARIO - Manual (Page 16)

page 16 of 41
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. manual-no.: 999035 / 15/12/2009
setting pressure unit (mbar / Torr / hPa)
setting basic setup
ready to
start
basic setup ”pressure control”
controller controls
-
pump according to preset pressure value
- air admittance valve (optional)
basic setup ”TURBO•MODE” (factory set)
controller controls
-
pump according to preset pressure value (backing pressure)
- setting ”Lo”: minimum pressure with preselected gas flow
- air admittance valve (optional)
General view basic setups
basic setup ”continuous pumping”
controller controls
-
pump according to preset pumping speed
- setting ”Hi”: optimum pumping speed at every pressure
- air admittance valve (optional)
configuration of the air admittance valve if applicable
CVC 2000 II