Engine break-in recommendations, Safety tips, Transporting passengers – Ram Trucks 2015 Cargo Van Commercial - Owner Manual User Manual

Page 107

Advertising
background image

ENGINE BREAK-IN RECOMMENDATIONS

A long break-in period is not required for the engine and

drivetrain (transmission and axle) in your vehicle.
Drive moderately during the first 300 miles (500 km).

After the initial 60 miles (100 km), speeds up to 50 or

55 mph (80 or 90 km/h) are desirable.
While cruising, brief full-throttle acceleration within the

limits of local traffic laws contributes to a good break-in.

Wide-open throttle acceleration in low gear can be detri-

mental and should be avoided.
The engine oil installed in the engine at the factory is a

high-quality energy conserving type lubricant. Oil

changes should be consistent with anticipated climate

conditions under which vehicle operations will occur. For

the recommended viscosity and quality grades, refer to

“Maintenance Procedures” in “Maintaining Your Ve-

hicle.”

CAUTION!

Never use Non-Detergent Oil or Straight Mineral Oil
in the engine or damage may result.

NOTE:

A new engine may consume some oil during its

first few thousand miles (kilometers) of operation. This

should be considered a normal part of the break-in and

not interpreted as a problem.

SAFETY TIPS

Transporting Passengers

NEVER TRANSPORT PASSENGERS IN THE CARGO

AREA.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 105

Advertising