Windshield washers, Mist feature, Rear wiper and washer – Ram Trucks 2015 Cargo Van Commercial - Owner Manual User Manual

Page 208: Rain sensing wipers — if equipped

Advertising
background image

Windshield Washers

To use the Washer, push on the end of the lever to the

second detent and hold while spray is desired. If the lever

is pushed while on the intermittent setting, the wipers

will turn on and operate for several wipe cycles after the

lever is released, and then resume the intermittent inter-

val previously selected. If the lever is pushed while the

wipers are in the off position, the wipers will operate

several wipe cycles, then turn off.

Mist Feature

Press the end of the multifunction lever inward (toward

the steering column) to the first detent and release for a

single wiping cycle.
NOTE:

The mist feature does not activate the washer

pump; therefore, no washer fluid will be sprayed on the

windshield. The wash function must be used in order to

spray the windshield with washer fluid.

Rear Wiper And Washer

Rotating the rotary ring to the first detent activates the

rear intermittent wipers. To activate the washers, rotate

the rotary ring fully forward and the washers will spray

until the ring is released, and then resume the intermit-

tent interval.
NOTE:

Rear window wipers function in the intermittent

wiper speed only.

Rain Sensing Wipers — If Equipped

This feature senses moisture on the windshield and

automatically activates the wipers for the driver. This

feature is especially useful for road splash or overspray

from the windshield washers of the vehicle ahead. Rotate

the end of the multifunction lever to one of the five

intermittent wiper sensitivity settings to activate this

feature.

206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising