Electronic stability control (esc) – Ram Trucks 2015 Cargo Van Commercial - Owner Manual User Manual

Page 469

Advertising
background image

brakes. This can help reduce braking distances. The BAS

complements the ABS. Applying the brakes very quickly

results in the best BAS assistance. To receive the benefit of

the system, you must apply continuous braking pressure

during the stopping sequence. Do not reduce brake pedal

pressure unless braking is no longer desired. Once the

brake pedal is released, the BAS is deactivated.

WARNING!

The BAS cannot prevent the natural laws of phys-

ics from acting on the vehicle, nor can it increase
the traction afforded by prevailing road conditions.

The BAS cannot prevent collisions, including those

resulting from excessive speed in turns, driving on
very slippery surfaces, or hydroplaning.

WARNING!

(Continued)

The capabilities of a BAS-equipped vehicle must

never be exploited in a reckless or dangerous
manner which could jeopardize the user’s safety or
the safety of others.

Electronic Stability Control (ESC)

The Electronic Stability Control (ESC) enhances direc-

tional control and stability of the vehicle under various

driving conditions. ESC corrects for over/under steering

of the vehicle by applying the brake of the appropriate

wheel to assist in counteracting the over/under steer

condition. Engine power may also be reduced to help the

vehicle maintain the desired path.
ESC uses sensors in the vehicle to determine the vehicle

path intended by the driver and compares it to the actual

path of the vehicle. When the actual path does not match

5

STARTING AND OPERATING 467

Advertising