Reverse (r), Neutral (n) – Ram Trucks 2015 Cargo Van Commercial - Owner Manual User Manual

Page 452

Advertising
background image

CAUTION!

Before moving the shift lever out of PARK, you

must turn the ignition switch from the LOCK/OFF
position to the ON/RUN position, and also press
the brake pedal. Otherwise, damage to the shift
lever could result.

DO NOT race the engine when shifting from

PARK or NEUTRAL into another gear range, as this
can damage the drivetrain.

REVERSE (R)
This range is for moving the vehicle backward. Shift into

REVERSE only after the vehicle has come to a complete

stop.
NEUTRAL (N)
Use this range when the vehicle is standing for prolonged

periods with the engine running. The engine may be

started in this range. Apply the parking brake and shift

the transmission into PARK if you must leave the vehicle.

WARNING!

Do not coast in NEUTRAL and never turn off the
ignition to coast down a hill. These are unsafe
practices that limit your response to changing traffic
or road conditions. You might lose control of the
vehicle and have a collision.

CAUTION!

Towing the vehicle, coasting, or driving for any other
reason with the transmission in NEUTRAL can cause
severe transmission damage. Refer to “Recreational
Towing” in “Starting And Operating” and “Towing A
Disabled Vehicle” in “What To Do In Emergencies”
for further information.

450 STARTING AND OPERATING

Advertising