Using the rke transmitter – Ram Trucks 2015 Cargo Van Commercial - Owner Manual User Manual

Page 23

Advertising
background image

using a hand-held Key Fob with RKE transmitter. The

RKE transmitter does not need to be pointed at the

vehicle to activate the system.
NOTE:

Inserting the Key Fob with RKE transmitter into

the ignition switch disables the system from responding

to any button pushes from that RKE transmitter. Driving

at speeds 5 mph (8 km/h) and above disables the system

from responding to all RKE transmitter buttons for all

RKE transmitters.
Two RKE transmitters may be supplied with the vehicle.

Vehicles built without the powered options will be

equipped from the factory with three-button RKE trans-

mitters, and those built with power options will be

equipped with up to seven-button RKE transmitters.

Using The RKE Transmitter

Three-button RKE transmitters will provide basic UN-

LOCK, LOCK, and PANIC functions.

Seven-button RKE transmitters will provide functions

that allow the same basic operation as the three-button,

but may also be used to operate the power liftgate

(optional), power sliding doors, and Remote Start feature

Key Fob With Three-Button RKE Transmitter

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21

Advertising