Cooling system pressure cap, Disposal of used engine coolant – Ram Trucks 2015 Cargo Van Commercial - Owner Manual User Manual

Page 598

Advertising
background image

have a authorized dealer drain, flush, and refill with

OAT coolant (conforming to MS.90032) as soon as

possible.

Cooling System Pressure Cap
The cap must be fully tightened to prevent loss of engine

coolant (antifreeze), and to ensure that engine coolant

(antifreeze) will return to the radiator from the coolant

recovery tank.
The cap should be inspected and cleaned if there is any

accumulation of foreign material on the sealing surfaces.

WARNING!

Do not open hot engine cooling system. Never add

engine coolant (antifreeze) when the engine is
overheated. Do not loosen or remove the cap to cool
an overheated engine. Heat causes pressure to

(Continued)

WARNING!

(Continued)

build up in the cooling system. To prevent scalding
or injury, do not remove the pressure cap while the
system is hot or under pressure.

Do not use a pressure cap other than the one

specified for your vehicle. Personal injury or en-
gine damage may result.

Disposal Of Used Engine Coolant
Used ethylene glycol-based engine coolant (antifreeze) is

a regulated substance requiring proper disposal. Check

with your local authorities to determine the disposal

rules for your community. To prevent ingestion by ani-

mals or children, do not store ethylene glycol-based

engine coolant in open containers or allow it to remain in

puddles on the ground. If ingested by a child or pet, seek

emergency assistance immediately. Clean up any ground

spills immediately.

596 MAINTAINING YOUR VEHICLE

Advertising