Using the panic alarm, Power open/close power liftgate — if equipped, Power open/close power liftgate — if – Ram Trucks 2015 Cargo Van Commercial - Owner Manual User Manual

Page 27: Equipped

Advertising
background image

Using The Panic Alarm
To turn the Panic Alarm feature on or off, push and hold

the PANIC button on the RKE transmitter for at least one

second and release. When the Panic Alarm is on, the

headlights and park lights will flash, the horn will pulse

on and off, and the interior lights will turn on.
The Panic Alarm will stay on for three minutes unless

you turn it off by pushing the PANIC button a second

time or if the vehicle is driven above 5 mph (8 km/h).
NOTE:

• When you turn off the Panic Alarm by pushing the

PANIC button a second time, you may have to move

closer to the vehicle due to the Radio Frequency (RF)

noises of the system.

• The Panic Alarm cannot be activated if the engine is

running.

Power Open/Close Power Liftgate — If Equipped

Push the LIFTGATE button twice on the RKE transmitter

within five seconds to Open/Close the Power Liftgate. If

the button is pushed while the liftgate is being power

closed, the liftgate will reverse to the full open position.
The power liftgate may also be opened and closed by

pushing the LIFTGATE button located on the overhead

console.
If equipped with a rear interior switch on the left rear

pillar, pushing this switch once will close the liftgate only.

The liftgate cannot be opened from this switch.
If the vehicle is locked and Vehicle Security Alarm is

armed, using the RKE transmitter to open the power

liftgate does not unlock the vehicle or disarm the Vehicle

Security Alarm.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25

Advertising