Flex FLC Coping - Manual

Flexcap FLC Coping
Tapered, Flat and Existing Slope with Nailer Versions
Warranty: The entire roof system is covered under one warranty and inspected after the project is complete to
assure proper installation. The system is inspected after the project is complete to assure proper
installation. This ensures protection for the most vulnerable area of the roof against failure due to
extreme wind up lift pressures.
Testing: • Tested per ANSI/SPRI ES-1 Standard to comply with the International Building Code.
“ Factory Mutual 1-90 approved for wind up lift protection.
• Miami-Dade Approved (No. 08-0604.02 12/11/13) to comply with the “High Velocity Hurricane
Zone of the Florida Building Code”.
Available Materials: Its unique design allows for covers to be manufactured in 24 ga. steel, .040", .050" and .063"
aluminum.
Watertight: Its 8" wide concealed splice plates with dual non-curling isocryl butyl sealant strips allow for thermal
movement of materials and provides a watertight seal at all joints.
Competitively Priced: The installed cost rivals even light gauge roof edge systems fabricated locally or in a roofer’s shop.
Efficient Design: A fuU, snap-on design in 12'-0" lengths and no crimping make for quick installation and low labor
costs. Pre-punched fastening holes ensure proper attachment to the building substrate. Corrosion
resistant, stainless steel springs are factory attached to the anchor clips and provide long-term,
positive spring loading. No adhesives are required.
Colors: Choose among a wide range of standard colors and finishes that meet your job requirements. A 20
year Kynar 500® finish warranty is included on standard colors. Custom post-coated Kynar 500
colors are available with an included 10 year Kynar 500 finish warranty or a 20 year Kynar 500 finish
warranty is available upon request. Anodized finishes are also available, but are not warranted.
Custom Capabilities: Radius and specially fabricated products are available to meet the unique needs of each project.
Accessories: Factory fabricated miters provide a cleaner, more aesthetically pleasing appearance. This eliminates
the need for field fabrication, providing time and labor savings.
Also Included: All fasteners are included and will arrive to the job site with the product.
p: 800-969-0108
f: 610-916-9501
features & benefits
71