Flex FLC Coping - Manual (Page 21)

STEP-UP COPING MITERS
LEFT HAND STEP-UP MITER
SPECIFY RISE
DIMENSION
OUTSIDE
FACE
RIGHT HAND STEP-UP MITER
SPECIFY RISE
DIMENSION
DIRECTION IS DETERMINED AS SEEN FROM ROOF
\ROOFO
NOTES:
^ Concealed splice plates are provided with factory
applied dual non-curing sealant strips.
^ Unless otherwise noted, fabrication of miters and
accessories are furnished standard utilizing a
non-penetrating quicklock joint, then factory sealed
watertight.
Fabrication will proceed only after receipt of
signed print approval.
Print Approval:
Architect and/or contractor shall verify all
dimensions, sizes and quantities. All
products to be installed in strict accordance
with Flex's printed instructions.
Approved by:
Date: _____
- Welded Miters and Accessories
Check one □ Required (surcharge) □ Not applicable
MATERIALS:
__ 24 GA. (.65 mm) Steel
__ .040" (1.01 mm) Aluminum
__ .050" (1.27 mm) Aluminum
__ .063" (1.60 mm) Aluminum
__ Other___________________
Color;______________________
Finish:___________________
QUANTITIES:
Right Hand Step-Up Miter(s)
Left Hand Step-Up Miter(s)
Inside
Face
Outside
Face
Actual Wall Size
□ Tapered
Inside
Face
Outside
Face
Actual Wall Size
□ Flat
PROJECT:
ARCHITECT:
ROOFING CONTRACTOR:
REPRESENTATIVE/DISTRIBUTOR:
Customer Service:
Phone: 800^969^0108
Fax:610-916-9501
DATE: 12/13/10
DRN BY: JJC
CKD BY: SAK
SHT.# OF
DWG# 28011-11382 B
p: 800-969-0108
f: 610-916-9501
print approval
91