Flex FLC Coping - Manual (Page 3)

s
APPROVED
FLEXCAP FLC COPING
FLAT VERSION
ANSI/SPRI ES-1 TESTED
Coping cover 12'-0"
(3.65 m) lengths
8" (203 mm) wide
concealed splice plate at
each joint
15/16"
(24 mm)
'A'
Inside Face
Min. 2 1/4" (57 mm)
Max. 6" (152 mm)
12" (305 mm) wide
20 ga. (1 mm) galvanized
anchor clips 4'-0" (1.22 m) o.c.
15/16"
(24 mm)
NOAK0.WWM Il'IDti
,1/
■ # 9 x 1 1/2" (38 mm)
Stainless steel
fasteners (provided)
"C"
3/8" (10 mm)
space provided for
wall variations
Outside Face
Min. 3" (76 mm)
Max. 6" (152 mm)
_______t
B'
Actual wall width
Coping is to be installed per Specifications and Flex's Installation Instruction Dwg, # 28111-3454
- Welded Miters and Accessories
Check one □ Required (surcharge) □ Not applicable
MATERIAL:
__ 24 Ga. (0.65 mm) Galv.
__ .040" (1.01 mm) Alum. Color:
_ .050" (1.27 mm) Alum.
__ .063" (1.60 mm) Alum. Finish:
OTHER
- Concealed splice plates are provided with factory applied dual
non- curing sealant strips.
- Unless otherwise noted, fabrication of miters and accessories
are furnished standard utilizing a non-penetrating quicklock joint,
then factory sealed watertight.
Fabrication will proceed only after receipt of
signed print approval.
Print Approval:
Architect and/or contractor shall verify all
dimensions, sizes and quantities. All
products to be installed in strict accordance
with Flex's printed instructions.
Approved by:
Date: ______
QUANTITIES:
__________ Lineal Feet 12'-0" (3.65 m) Lengths
_______ Outside Miters @ (______ °)
_______Inside Miters @ (__
_______Right End Caps
_______Left End Caps
PROJECT:
ARCHITECT:
ROOFING CONTRACTOR:
REPRESENTATIVE/DISTRIBUTOR:
Customer Service:
Phone: 800--969-0108
Fax: 610-916-^9501
DATE: 12 / 13/10
DRN BY: JJC
CKD BY: SAK
SHT.# OF
DWG# 28011-3458
c
p: 800-969-0108
f: 610-916-9501
print approval
73