Print approval, Materials, Quantities – Flex FLC Coping User Manual
Page 23: Endwall flashing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ENDWALL FLASHING
COPING VERSION
3"
Fabrication will proceed only after receipt of
signed print approval.
Print Approval:
Architect and/or contractor shall verify all
dimensions, sizes and quantities. All
products to be installed in strict accordance
with Flex's printed instructions.
Approved by;
Date:
______
MATERIALS:
__ 24 GA. (0.65 mm) Steel
_.040" (1.01 mm) Alum.
__ .050" (1.27 mm) Alum.
__ .063" (1.60 mm) Alum.
Other_________________
Color;.
Finish:
QUANTITIES:
_______ Right End Flashing .
□ Tapered □ Flat
Left End Flashing
PROJECT:
ARCHITECT:
ROOFING CONTRACTOR:
REPRESENTATIVE/DISTRIBUTOR:
Customer Service:
Phone: 800-969^0108
Fax:610-916-9501
DATE: 12/13/10
DRN BY: JJC
CKD BY: SAK
SHT# OF
DWG# 28011-11384
В
p: 800-969-0108
f:
610-916-9501
print approval
93