Antenna/cable system connections, Combination vhf/uhf antenna, Catv coaxial cable – Sears 934.5512559 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ANTENNA/CABLE SYSTEM CONNECTIONS
For some of the most common types of connections, see the following drawings. Use only one connection. For
any further complex connections, please contact your local dealer or other qualified persons. (You may need
additional accessories which are not supplied).
COMBINATION VHF/UHF ANTENNA
(J)Disconnect
the
round
75-ohm
combination
VHF/UHF coaxial antenna cable from the back of
your TV set.
(2)Reconnect the coaxial cable to ANT. IN terminal of
the VCR.
(3) Conncct one end of the COAXIAL CABLL (sup
plied) to the ANT. OUT jack of the VCR.
(4) Connect the other end of the COAXIAL CABLE
(supplied) to the antenna/cable jack of your TV.
CATV COAXIAL CABLE
(3)Connect one end of the COAXIAL CABLE (sup
plied) to the ANT. OUT jack of the VCR.
(2)Reconnect the CATV coaxial cable to ANT. IN ter- (4)Connect the other end of the COAXIAL CABLE
(l)Disconnect the CATV coaxial cable from the back
of your TV set.
minai of the VCR.
(supplied) to the antenna/cable jack of your TV.
Note to CATV system installer
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected
to the grounding system of the building as close to the point of cable entry as practical.
- 10-
EN
★
5CI6