Sears 934.5512559 - Manual (Page 7)

1 Cassette Compartment
2 STOP/EJECT button— Press to stop the tape mo­
tion. Press again to remove the tape from VCR.
3 PLAY button -Press to begin playback of a tape.
4 REW(ind) button -Press to rewind the tape, or to
view video in reverse direction at a faster than nor­
mal speed. Press PLAY button to return VCR to nor­
mal playback speed.
5 F.FWD button— Press to advance the tape, or to
view video in forward direction at a faster than nor­
mal speed. Press PLAY button to return VCR to nor­
mal playback speed.
6 PAUSE/STILL button- Press to temporarily stop
the tape during recording or to view a still picture
during playback.
7 END button- Press to select desired end time in
the Quick Set Program mode.
8 START button- Press to select desired start time
in the Quick Set Program mode.
9 QUICK SET PROGRAM button— Press to set
the Quick Set Program.
10 OTR button- Press to activate one touch record­
ing mode.
11 REC(ord) button - Press to begin manual record­
ing.
12 CH(annel) buttons— Press to select the channel
for viewing or recording.
TRACKING function— Press A orT to minimize
video ‘noise’ (lines or dots on the TV screen) during
tape playback.
13 SPEED button— Press to set desired tape speed.
14 Digital Display- Displays the clock, timer record­
ing, counter, channel etc.
15 Remote Sensor window- Receives the infrared
control signals from the handheld remote control
unit.
16 TV/VCR button- Press to select the signal source
that your TV will receive.
VCR position: to view playback, to monitor video
recordings or watch TV using the VCR tuner.
TV position: to watch TV or to view one program
while recording another.
17 POWER button— Press to turn VCR on and off.
Press to activate the automatic timer recording.
18 AUDIO IN jack -For connection to audio output
jack of your audio equipment or another VCR. (Use
these Jack when selecting the "L2" position, see page
13 "INPUT SELECT".)
19 VIDEO IN jack —For connection to video output
jack of your video camera or another VCR. (Use this
jack when selecting the "L2" position, see page 13
"INPUT SELECT".)
20 Power cord- Connect to a standard AC outlet
(120V/60HZ).
21 AUDIO OUT jack —For connection to the audio in
jack of your audio equipment or another VCR.
22 AUDIO IN jack- For connection to the audio out­
put jack of your audio equipment or another VCR.
(Use these jack when selecting the "LI" position, see
page 13 "INPUT SELECT".)
23 ANT. IN terminal-For connection to an antenna
or CATV.
24 ANT. OUT terminal — For connection to an an­
tenna in terminal of your TV.
25 CH3/CH4 selector switch- Use to select the
video output channel (3 or 4) for playback from the
VCR.
26 VIDEO IN jack — For connection to the video out­
put jack of your video camera or another VCR.(Use
this jack when selecting the "LI" position, see page
13 "INPUT SELECT".)
27 VIDEO OUT jack — For connection to the video in
jack of video processor or another VCR.
-7 LN
★ ★ ★ ★ ★ 5CI6