Sears 934.5512559 - Manual (Page 25)

TIME SEARCH
The Time Search function makes it possible to quickly advance the tape from any position by entering the exact
desired amount of playback time of the part that you want to skip.
• VCR Power must be on.
• Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR.
(CH 3 or 4)
• Press the TV/VCR button so that "VCR" appears on the display.
• You must use remote control for this procedure.
Example; To watch a program after 2 hours 53 minutes from present position to forward direction.
m
Press TIME SEARCH but­
ton. The HOUR digits flash.
Enter the desired hour with
number buttons.
Notes:
• Time search can be set up to 9:59.
• Procedures must be followed within 30 seconds
from steps [1] to [3]. Otherwise the Time Search
mode will be cancelled.
• This function is not operative in recording mode.
• A video cassette must be inserted in the VCR for this
function to work.
• Press STOP button on the VCR or remote control
unit to exit the Time Search mode.
Enter the desired minutes
with number buttons.
To correct the time, press
DELETE button and re­
peat steps [1] to [3].
IN«:: S3 .... N
Press F.FWD or REWIND
button. The tape will move
to the specified point.
Note: The time counts down
as the searching progresses.
When 0:00 is reached, the
tape will start playback
automatically.
2 5 - E N
★ ★★★★ 5B24