Counter memory, To cancel the counter memory – Sears 934.5512559 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
COUNTER MEMORY
The TAPE COUNTER MEMORY button can be used
during rewind or fast forward to automatically stop the
tape when the counter reaches a preset memory position
of approx.0;00;00.
For example, this feature can be used to return the tape
to a pre-selected position immediately after recording,
or to repeatedly playback a certain portion of a tape.
NOTE: You must use remote control for this procedure.
[n
.
Insert a cassette tape with its safety tab in place, if nec
essary, rewind or fast forward the tape to the point at
which you want to begin recording.
If the counter is not shown
0:00:00,
press
TAPE
COUNTER RESET button
to reset to 0:00:00.
TO CANCEL THE COUNTER MEMORY
When the counter appears
on the display, press TAPE
COUNTER
MEMORYbut-
ton so that "M"
disappears
from the TV screen.
Press
TAPE
COUNTER
MEMORY button so that
"M" appears on the TV
screen.
Press RECORD or PLAY button.
Press STOP button when re
cording or playback is com
pleted.
(If the counter is not displayed, press SELECT button
so that the counter appears on the VCR display or on
the TV screen.)
To
activate
the
counter
memory function, press RE
WIND button. The tape will
automatically stop when the
counter returns to 0:00:(X).
- 3 2 -
Ei
★ ■*★★★ 5C