Sears 934.5512559 - Manual (Page 31)

RENTAL FLAY
This function enables you to improve the picture quality when playing back worn cassettes such as those rented
from a video shop.
• VCR Power must be on.
• Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR.
(CH 3 or 4)
• Press the TV/VCR button so that "VCR" appears on the display.
• You must use remote control for this procedure.
TO EXIT THE RENTAL PLAY MODE
Insert rental tape into VCR. VCR will automatically Repeat steps [1] to [3]. Then, follow step [4]. but select
start tape playback.
"OFF" for normal playback.
Press MENU button on the
remote control. Select item
2(VCR SET UP) with num­
ber buttons.
/'■—
MENU
1 TIMER PROGRAMMING
VCR SETUP
3 INITIALIZE
s ______________________ /
Select item 3(RENTAL)
with number buttons.
Press SELECT button re­
peatedly to select "ON".
NOTES:
1 TAPE SELECT -Tl30
i nePEAT PLAr
3 RENTAL
• Once you select the rental play mode, it stays in ef­
fect even after you turn off the VCR.
• Selecting ON or OFF must be done in the play mode
only.
- 3 1 -
BN
★ ★★★★ 5C16