Reverse stitch control – Sears KENMORE 385.12814 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Reverse Stitch Control
For Zigzag Stitch
In a correct zigzag stitch, the bobbin threads will not show on the top side of
fabric and the top threads will show slightly on the bottom side* See below for the
correct appearance* To match this appearance, adjust the top tension.
Top tension
Too Tight
Bottom side of Fabric
Too Tight:
— Corner ot each zig
zag will puH together
on the lop side ot
tabrics
Top tension
Too Loose
Too Loose;
— The top thread will
loop through bottom
side of fabric and will
be puHed almost
together.
Jost Right
Jost Right;
Minimize the amount
ot top thread visible
on the bottom side ot
fabric without causing
excessive
puckering
or caus! ng the bobbin
thread to show on the
top side. Results vary
with fabric, thread and
sewing conditions.
sewing.
Release to sew forward again.
26