Canon SCANFRONT 220 - Manual (Page 151)

9-3
Chapter 9 Appendices
Power Supply
DC16V 2.1A
Power Consumption
Scanning: 26W
Display Off mode: 10W
Low Power mode: 4.5W
Power Turned Off: less than 1W
Noise
Not more than 66 dB
Operating Environment
Temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)
Humidity: 20%-80%RH
❏ Network Specifications
Network
Microsoft Windows Network
Protocol
TCP/IP
IP Address
Obtained automatically (DHCP supported) or fixed
address
Other
Active Directory and LDAP supported
❏ Transfer Destinations
E-mail
FTP Server
Shared Folder
USB Memory
❏ AC Adapter
Model
MG1-3968
Input
AC100-240V 50/60 Hz 0.83-0.45A
Output
DC16V 2.6A
Weight
Approximately 0.35 kg (including power cord)
Specifications are subject to change without notice.
❏ Consumable Parts
Roller replacement kit (product code: 2445B001)
Replacement kit for the rollers (feed roller and retard
roller) and document holding guide
(See “Replacing
the Rollers and Document Holding Guide” on p. 7-8.)
IMPORTANT
• Rollers are consumable parts. When the rollers start to wear
out, problems such as paper jams and improper document
feeding become more likely to occur. If this happens, replace
the rollers regardless of the page count.
• For information about the roller replacement kit, contact your
local authorized Canon dealer or service representative.