Canon SCANFRONT 220 - Manual (Page 68)

4-26
Chapter 4 Web Menu (Administrator Mode)
Display Off
Set the scanner to turn off the touch panel display after a
specified period of inactivity.
IMPORTANT
When Display Off activates and the touch panel display turns
off, touch the panel to restore the display.
Auto Logout
Set the scanner to automatically log users out after a
specified period of inactivity.
Low Power Mode
Set the scanner to switch to Low Power mode after a
specified period of inactivity.
IMPORTANT
Restoring full power to the scanner from Low Power mode has
the same effect as restarting the scanner.
• If the scanner switches to Low Power mode while a user is
logged in, that user will be logged out when power is restored.
• When the scanner switches to Low Power mode, the touch
panel display turns off and the power indicator flashes. To
switch out of Low Power mode, press the power switch.
• The scanner does not transition to Low Power mode during
the flow of data on the network when connected to a network.
• Note that if the scanner transitions to Low Power mode when
the placed documents run out after scanning is started, or
scanning is suspended because of a paper jam or double
feed, all the images that were scanned prior to the suspending
of scanning and that were not yet transmitted are discarded.
❏ Login Options
You can set the type of user login screen that appears.
Hint
The login setting can also be changed under [Administrator
setting] on the scanner.
List type login
Log in by selecting a user from the list.
Key in type login
Log in by entering a user name and password.
IMPORTANT
When using an authentication server, the login type is set to
[Key in type login], and users log in by selecting [Device
Authentication] and [Server Authentication].
(See
“Authentication Server” on p. 4-29.)
❏ Administrator Settings
You can set the password and e-mail address of the
Administrator.
Administrator Password
Change the Administrator password.
Administrator Address
Register the Administrator e-mail address.