Connecting the ac adapter, Connecting the network cable, Network cable – Canon SCANFRONT 220 User Manual
Page 34: See p. 3-3.), Adapter
Advertising
3-3
Chapter 3 ScanFront Setup
❏ Connecting the AC Adapter
Follow the procedure shown below to connect the AC adapter.
CAUTION
Make sure to use only the AC adapter and power cord included with the scanner.
a Connect the power cord and AC adapter.
b Insert the plug of the AC adapter into the power connector.
c Connect the power cord to the wall outlet.
❏ Connecting the Network Cable
Insert the network cable connector (RJ-45) into the LAN port.
Advertising