Canon SCANFRONT 220 - Manual (Page 94)

5-16
Chapter 5 Web Menu (User Mode)
Mode
Select the scanning mode (Black and White, Error
Diffusion, Text enhance, Gray, Color).
IMPORTANT
Depending on the selected mode, the file formats available for
saving may be limited. A warning message appears when an
unavailable combination is selected.
Resolution (dpi)
Select the scanning resolution (100, 150, 200, 300, 400, or
600 dpi).
Scanning Side
Select the method for scanning the document (Simplex,
Duplex, Skip Blank Page).
Hint
• The Skip Blank Page option scans both sides of a document
and skips saving any image it determines to be a blank page.
• You can adjust the sensitivity of the Skip Blank Page option
under [Contents detection sensitivity].
• The initial value for the Skip Blank Page option is set to “90.”
As you lower the value from the default setting, pages of the
document with text become more likely to be skipped as well.
As you raise the value from the default setting, pages of the
document that are blank become less likely to be skipped.
Prescan
Enables you to preview an image of the first page of the
document before scanning the entire document.
Hint
• Scanning pauses after the first page of the document is
scanned, and the image of the first page is displayed.
• Use the displayed image to confirm and adjust the brightness
and contrast. Press [Continue] to confirm the adjusted
brightness and contrast for the first image and continue
scanning.
File name
Specify a name for the image file to be sent using letters
(A-Z, a-z) and numbers (0-9).
Add Date to File name
The scanner adds 17 digits that indicate the date and time
to the file name of the image to be sent.
Ex.) May 14, 2007, 3:40:30 p.m.
yyyymmdd: File name + 20070514154030123
mmddyyyy: File name + 05142007154030123
ddmmyyyy: File name + 14052007154030123
* The last three digits indicate the number of milliseconds.
File format
Select a file format for the image file, and configure the
corresponding settings.
TIFF: Multi page settings
Select [Single page (Front/back separate file)] to save each
side of each page as a separate image file, [Single page
(Front/back same file)] to save each page as a separate
image file, or [Multi page] to save one image file
containing multiple pages when scanning multiple pages.
TIFF JPEG PDF
Black and White Yes No Yes
Error Diffusion Yes No Yes
Text enhance Yes No Yes
Gray No Yes Yes
Color No Yes Yes