Canon SCANFRONT 220 - Manual (Page 73)

4-31
Chapter 4 Web Menu (Administrator Mode)
❏ Address Book Server
You can configure the settings for using an address book
server (LDAP server).
Address Book Server Setting
Select one of these options when using an address book
server (LDAP server). If the authentication server and
address book server are different, make sure to enter
values for all of the settings.
For details on each setting, see the settings under
“Authentication Server” on p. 4-29 .
❏ FTP server
You can use a function that transfers a scan result log along
with an image file during transfer to the FTP server. When
this function is enabled, a scan result log with the same file
name as the image file is transferred to the same FTP
folder as the image file. The extension for the log file is
“.log”.
❏ NTP Server
You can configure the NTP server settings to synchronize
the ScanFront with the correct time.
NTP Server Setting
Select this check box to synchronize with the NTP server.
NTP Server(primary)
Enter the host name or IP address of the main NTP server.
NTP Server(secondary)
Enter the host name or IP address of the secondary NTP
server.
IMPORTANT
The NTP server and ScanFront are synchronized when [OK] is
clicked on the settings screen to complete the settings and
every time the ScanFront is started.