Configuring the speakers – Onkyo TX-SR601 User Manual

Page 33

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Configuring the speakers

Setting the speaker distance from your normal

listening position

Each speaker can be set between 1 and 30 feet (0.3 and 9 meters) in

1 "foot (0.3 meter) increments. Select the setting closest to the actual

distance from the speaker to your normal listening position.

Note:

Speakers that you selected “No” or “None” for in the “Speaker

Conhg” menu will be disabled.

TX-SR701/701E

Notes:

• For the front L/R, center and subwoofer speakers, the speaker

distance values you can set will be between the current

maximum value(s) among all speakers and the values 10 feet (3
meters) lower than the current maximum value(s). For example,

if the current maximum value Is 30 feet (9 meters), the speaker

distance values you can set will be between 20 feet (6 meters)

and 30 feet (9 meters).

For the sui'round and surround back speakers, the speaker

distance values you can set will be between the current

maximum value(s) among all speakers and the values 20 feet (6
meters) lower than the current maximum value(s).

• Whenever you set the speaker distance value foi' any one of the

speakers, if you enter any values higher than the current
maximum value, the value you enter will be the new inaximuin

value and any other speaker distance values you already set will

automatically be adjusted to the values so that they keep the
same value difference to the new maximum value as the one to

the last maximum value.

Use the A and ▼ cursor buttons to

select “3. Speaker Distance” on the
main menu and then press the

ENTER button.

The “Speaker Distance” menu appears.

'lillENTERlIlli'

1.Hardware Config

2.Speaker Con£ig_____
3.Speaker Distance
4.lievel Calibration

5.Input Setup
6.Preference

®®I ENTER I Quit: |SETUP|

.S. S

r

/.V;

Menu *****************

3.Speaker Distance

a . On i t______
b .Left
c.

Center

d.

Right

e.

Surr Right

f.

Surround Back

g.

Surr Left

h.

Subwoofer

mm

Quit:

feet an

12ftBl
12ft*

7ft*
7ft*
7ft*
7ft*

SETOPI

4. Use the A and ▼ cursor buttons to select “Center” and

then use the

<

and

>■

cursor buttons to set the distance

from the center speaker to your normal listening position.

5. Use the A and ▼ cursor buttons to select “Right” and

then use the -4 and ^ cursor buttons to set the

distance from the front right speaker to your normal

listening position.

6. Use the A and ▼ cursor buttons to select “Surr Right”

and then use the ◄ and ► cursor buttons to set the
distance from the surround right speaker to your
normal listening position.

7. Do the following when you use two surround back

speakers. If you use one surround back speaker, go to
step 8.

Use the A and ▼ cursor buttons to select “Surround

Back R” and then use the 4 and

>■

cursor buttons to

set the distance from the surround back right speaker

to your normal listening position.

8. When you use one surround back speaker:

Use the A and ▼ cursor buttons to select "Surround

Back” and then use the 4

and

>■

cursor buttons to set

the distance from the surround back speaker to your

normal listening position.

When you use two surround back speakers:

Use the A and ▼ cursor buttons to select “Surround

Back L” and then use the 4

and ^ cursor buttons to

set the distance from the surround back left speaker

to your normal listening position.

9. Use the A and ▼ cursor buttons to select “Surr Left”

and then use the 4

and ^ cursor buttons to set the

distance from the surround left speaker to your
normal listening position.

10. Use the A and ▼ cursor buttons to select “Subwoofer”

and then use the 4

and ► cursor buttons to set the

distance from the subwoofer speaker to your normal

listening position.

Press the RETURN button to return to the main menu.
Press the SETUP button on the front panel or SE'i’UP button on the
remote controller button to exit the Setup menu.

un I T

t e e T

2.

Use the A and ▼ cursor buttons to select “Unit” and

then use the 4

and ► cursor buttons to select the

desired unit of measure.

feet: Select if you will enter the distances in feet,

meters: Select if you will enter the distances in meters.

3. Use the A and ▼ cursor buttons to select “Left” and

then use the "4

and ► cursor buttons to set the

distance from the front left speaker to your normal

listening position.

33

Advertising