Input setup, Return, Setup – Onkyo TX-SR601 User Manual
Page 52: Enter, Setup procedure, Select the desired input source, A. digital input, Notes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Input Setup
RETURN
SETUP
-A/TH/^
ENTER
This menu allows you to make the various settings concerning the
signals input from the various input sources that you use with the
TX-SR701/701E/601/601E. The settings made in this menu are
valid for the input source that is currently selected with the input
source buttons at the front panel and, therefore, these settings are
made separately for each input source.
Setup Procedure
1. Select the desired input source.
2. Press the SETUP button on the front panel or SETUP
button on the remote controller.
The main menu appears.
* Menu
**************
1.Hardware Config
2.Speaker Config
3.Speaker Distance
4.Level Calibration
5.Input Setup________
6.Preference
mm I
enter
] Quit: I
setup
]
J. f M” i.'
—' C.T f.' L.* Г
3. Use the A and T cursor buttons to select “5, Input
Setup” and then press the ENTER button.
The “Input Setup” menu appears.
4. Use the A and T cursor buttons to select an item and
then use the ► and ◄ cursor buttons to set the
desired value.
Press the RETURN button to return to the main menu.
Press the SETUP button on the front panel or SETUP button on the
remote controller to exit the Setup menu.
a. Digital Input
This setting tells the TX-SR701/701E/601/601E which input source
button on the front panel is connected with which digital input jack
on the rear panel.
For example, if the input source selected at the front panel is CD
and the compact disc player is connected to DIGITAL INPUT
OPTICAL 2, then select “OPT2” here. If the input source selected
os not connected to a digital input, then select “—
OPTl, 2: Select if the input source is connected to either of the
DIGITAL INPUT OPTICAL 1 or 2 Jack.
COAX: Select if the input source is connected to the DIGITAL
INPUT COAXIAL jack.
-------- : Select if the input source is not from a digital input jack.
The default settings aie given below.
Input source
Digital input
CD
COAX
PHONO*
""""
TAPE
DVD
OPT 1
VIDEO 1
....
VIDEO 2
....
VIDEO 3
OPT 2
—: Available for digital input but not set in initial settings.
*TX-SR701/701Eonly
Notes:
• When you select “TUNER” for input, you cannot assign digital
inputto “TUNER.”
• Since VIDEO 4 is fixed to the optical digital terminal on the
front panel, this item will be disabled if VIDEO 4 is selected.
D . . i n p o t
: U H l 1
Zcih s L a s t l ' s l i d
52