Onkyo TX-SR601 - Manual (Page 64)

Using remote controller
Controlling an Onkyo DVD player
The RI connector of the Onkyo DVD player must be connected to
the TX-SR701/701E/601/601E (see page 24).
1. Press the DVD MODE button.
The DVD MODE button lights.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control an Onkyo DVD player.
Operation buttons;
ON: Turns DVD player on and off
STANDBY: Turns DVD player off (Some sets may not respond to
this button. In this ca.se, use the ON button to put the DVD player in
the standby state.)
SETUP; Displays the OSD of the DVD player
A/V/<i/[> : Moves cursor in the OSD Menu of the DVD player
ENTER: Enter button for the OSD Menu of the DVD player
RETURN; Return button for the OSD Menu of the DVD player
TOP MENU or MENU; Displays menu screens recorded on DVD
media
DISC Selects disc in DVD changer
AUDIO SEE: Selects audio or language track (if recorded on the
DVD)
ANGUE: Selects a camei'a angle (if recoi'ded on the DVD)
SUBTITUE: Selects subtitle language (if recorded on the DVD)
SEARCH; Searches for location on disc to start playback
RANDOM; Random playback
CC3: Chapter/Track down
CX41: Chapter/Track up
O; Play
□: Stop
<XI: Fast reverse
C/>: Fast forward
E3: Pause
Opens/closes the disc tray
0,1 to 9, +10: Numeric keys
You may also use the following buttons;
VOU A/P: Adjusts volume atTX-SR701/701E/601/601E
MUTING; Activates muting function at TX-SR70i/701E/601/60iE
Note:
When operating an Onkyo DVD player directly with the remote
controller without connecting the Rl terminals, pre-programming
is necessary (see page 67).
64