Product at a glance, Safety notes – Chauvet Obey 40 User Manual

Page 11

Advertising
background image

Obey™ 40 User Manual Rev. 7

Page 11 of 160

Product at a

Glance

Use on Dimmer

x

Auto Program

x

Outdoor Use

x

Auto-Ranging Power Supply

P

Sound-Activated

P

Replaceable Fuse

x

DMX

P

User-Serviceable

x

Master/Slave

x

Safety Notes

These notes include important information about the mounting, use, and maintenance of this
product. Read these notes before using the product.

· Always connect the product to a grounded circuit to avoid the risk of electrocution.
· Make sure the power cord is not crimped or damaged.
· Always disconnect the product from the power source before cleaning it or replacing the fuse.
· Never disconnect the product from the power source by pulling or tugging on the cord.
· If mounting the product overhead, always secure it using a safety cable.
· Make sure there are no flammable materials close to the product when it is operating.

· The product is for indoor use only! It is rated at IP20.
· Do not expose the product to rain or moisture.
· Make sure the voltage of the power source used for the product is within the range stated on the

label or on rear panel of the product.

· Never connect the product to a dimmer or a rheostat.
· Always install the product in a location with adequate ventilation, and leave at least 20 in (50 cm)

between the product and adjacent surfaces.

· Be sure that no ventilation slots on the product’s housing are blocked.
· Do not operate the product in an ambient temperature higher than 104 °F (40 °C).
· Always carry the product by its mounting sides.
· In the event of a serious operating problem, stop using the product immediately.
· Never try to repair the product. Repairs carried out by untrained people can lead to damage or

malfunction.

· If repairs are required, contact the nearest authorized technical assistance center.

See

Contact Us

for more information.

· To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely

disconnect the product from power via breaker or by unplugging it.

Keep this User Manual for future reference. If you sell the product to another user, be sure to give
this manual to the next owner.


Advertising