Cabletron Systems SPECTRUM FRX6000 User Manual

Page 208

Advertising
background image

SmartSwitch 1800 Voice Configuration

12-4

Configuring System-Level Voice Parameters

Dial Digits

This Þeld speciÞes the number of digits used for speed-dial and auto-dial
numbers. A speed-dial number is a short substitute for a longer number, and an
auto-dial number will be dialed automatically when the receiver is taken
off-hook. The default value for this parameter is 3.

Extended Dial Digits

This speciÞes the number of extended dial digits that must be entered by the user
of attached equipment as part of a dial string when Ext. Digits Source in the Voice
ConÞguration window is set to User (see

ConÞguring Voice Ports

,

page 12-8

).

Speed-dial numbers and extended digits can be output by remote voice/fax ports.

Extended digits will be forwarded to the remote end of the frame relay connection
if all of these conditions are met:

¥

Extended dial digits are conÞgured in the speed-dial map;

¥

The parameter Forwarded Digits in the Voice ConÞguration window (see

ConÞguring Voice Ports

,

page 12-8

) is set to All or Extended;

¥

The parameter Ext. Digits Source in the Voice ConÞguration window is set to
Map.

If the Þrst two conditions are met, but Ext. Digits Source is set to User, the
operator must enter the extended dial digits to be forwarded.

Setting the number of Extended Dial Digits to a value greater than zero reduces
the number of allowable entries in the Voice Speed Dial ConÞguration window.
When the Extended Dial Digits is 0, up to 512 Speed Dial entries can be deÞned.
When Extended Dial Digits is greater than 0, only 256 entries can be deÞned. The
default value for this parameter is 0.

Ring Voltage/Frequency

This parameter speciÞes the voltage and frequency of the telephone ring circuit.
In two-wire OPX/FXS mode, the SmartSwitch 1800 provides ring voltage to the
telephone when it is called by a remote unit. The frequency of ringing voltage is
variable and is a divide by 1, 2, or 3 of the main AC line frequency. The default
value for this parameter is v80-hz-20-00.

Haiti

509

Peru

51

Zaire, Rep.

243

Honduras

504

Philippines

63

Zambia

260

Hong Kong

852

Poland

48

Zimbabwe

263

India

91

Table 12-1. International Dialing Country Codes

Country

Code Country

Code Country

Code

Advertising
This manual is related to the following products: