Cabletron Systems SPECTRUM FRX6000 - Manual (Page 57)

Trap Messages 3-7
Configuring the Trap Table
FCS Rej/Sec exceeded T: “n” C: “n” 314
The port statistic FCS Errors/Sec has exceeded the threshold (T: ÒnÓ) that was set
by the user. (C: ÒnÓ is the current value.) A value consistently greater than zero
indicates line problems.
Severity Informational (Level 4)
Action If this happens frequently, check the line for noise, and check for
conÞguration errors on both the FRX port and the connected user
device.
Log Rej/Sec exceeded T: “n” C: “n” 315
The port statistic Logical Rejects/Sec has exceeded the threshold (T: ÒnÓ) that was
set by the user. (C: ÒnÓ is the current value.) A value consistently greater than zero
indicates line problems.
Severity Informational (Level 4)
Action If this happens frequently, check the line for noise, and check for
conÞguration errors on both the FRX port and the connected user
device.
Trn Err Ratio exceeded T: “n” C: “n” 316
The port statistic Transmit Error Ratio has exceeded the threshold (T: ÒnÓ) that
was set by the user. (C: ÒnÓ is the current value.)
Severity Informational (Level 4)
Action If this happens frequently, check the line for noise, and check for
conÞguration errors on both the FRX port and the connected user
device.
Rcv Err Ratio exceeded T: “n” C: “n” 317
The port statistic Receive Error Ratio has exceeded the threshold (T: ÒnÓ) that was
set by the user. (C: ÒnÓ is the current value.)
Severity Informational (Level 4)
Action If this happens frequently, check the line for noise, and check for
conÞguration errors on both the FRX port and the connected user
device.
Rcv Port Usage exceeded T: “n” C: “n” 318
The port statistic % Receive Port Utilization has exceeded the threshold (T: ÒnÓ)
that was set by the user. (C: ÒnÓ is the current value.)
Severity Informational (Level 4)
Action If this happens frequently, you may need to add ports or reroute
some trafÞc.