Cabletron Systems SPECTRUM FRX6000 - Manual (Page 150)

SNA Status and Configuration
7-26 Viewing SDLC Status
Changing Host Connections
To edit the Host Connection values:
1. If you wish to modify an existing entry, be sure that entry is highlighted in the
list box portion of the window.
2. Enter and/or edit the values displayed in the text boxes, as desired.
(Remember, some values which are settable from this window must mirror
values configured elsewhere; be sure these values match as necessary.)
3. Click on to create a new entry, or on to edit the entry
currently selected in the list box.
Viewing SDLC Status
Four additional port-level menu selections provide statistical information
regarding SDLC trafÞc and performance on a selected SNA port.
SDLC Port Statistics
The SDLC Port Statistics window provides general information about the type of
management trafÞc that is being transmitted across the selected port. To access
the window:
1. Click mouse button 3 on the SNA port of interest to display the Port Menu.
2. Drag down to SDLC Port Statistics, and release. The SDLC Port Statistics
window,
Figure 7-7 , will appear.
NOTE
After you have made system-level changes (such as conÞguring LLC2), you must apply
those changes by rebooting the FRX or SmartSwitch 1800 device, or through console
management via the [F7] command.
TIP
The statistical windows display their information via the SPMA Meters application; for
more information on how to manipulate and conÞgure these meters, see the SPMA Tools
Guide
.