Aiwa XM-M25 - Manual (Page 16)

KARAOKE
MICROPHONE MIXING
• If a microphone is held too near the speakers, a howling sound
may be produced. In this case, hold the microphone away from
the speakers, or decrease the microphone volume.
• If sound through the microphone is extremely loud, it may be
distorted. In this case, decrease the microphone volume.
Recommended microphone
The use of unidirectional type microphone is recommended to
prevent howling. Contact your local Aiwa dealer for details.
A microphone (not supplied) can be connected to this unit,
allowing you to sing along to music sources.
Use a microphone with mini plugs (03.5 mm. Vs inch).
Before connecting a microphone
Set the MIC VOL to MIN.
1 Connect your microphone to MIC jack.
MIC
2 Press one of the function buttons to select the
source to be mixed, and play the source.
3 Adjust the volume and tone of the source.
4 Turn MIC VOL to adjust the microphone volume.
If TAPE function Is selected as the source, the microphone
sound can only be output from the speakers when the tape is
being played.
To record microphone sound mixed with source sound
Follow the procedure for recording from the sound source (see
page 12).
The TAPE function cannot be used for mixing recording.
When the microphone Is not in use
Set MIC VOL to MIN and remove the microphone from the MIC
jack.
15
ENGLISH