Aiwa XM-M25 - Manual (Page 9)

PRESETTING STATIONS
0-9,
+10
BAND/
MODE
TUNER
The unit can store a total of 32 preset stations (Each band has a
maximum of 20 available preset stations). When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1 Press BAND/MODE TUNER to select a band.
2 Press numbered buttons 0-9 and +10 to select a
preset number.
Example:
To select preset number 20, press +10, +10 and 0.
To select preset number 15, press +10 and 5.
Selecting a preset number on the main unit
Press
TUNEIVBAND to select a band. Then, press DIR/
PRESET repeatedly.
Each time
DIR/PRESET is pressed, the next ascending
number is selected.
To clear a preset station
Select the preset number of the station to be cleared. Then,
press ■ CLEAR, and press II SET within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
O
£
Q
m
m
o
S
<
BC
1 Press TUNER/BAND to select a band, and press
I DOWN or P>-UP to select a station.
2 Press II SET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to the station.
Frequency
fl/t
......^
1 -
1 ■
mz
Preset number
Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
for all the bands or a total of 20 preset stations for one band
have already been stored.
ENGLISH
8