D 3d function – Beko 4401 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3-
(H Turbo oven:
In this position, you oan perform the
functions listed below by operating the
turbo-heating element and turbo-fan.
* In timer equipped models; timer and
heater are connected serially. Therefore,
to run heater, your timer must be
adjusted (please refer timer guide).
* For food that is cooked at the same
temperature but has different cooking
times, you should set the oven program
according to food which has shortest
cooking period Set the additional
duration for the remaining foods after
taking out the food that has first been
cooked.
* Energy conservation can be achieved
with your oven by cooking two or three
different foods at the same time, without
mixing their odours.
* Pierce the dough to prevent the space
between the trays from becoming
blocked through swelling while cooking
pastries in the turbo position using three
trays.
D 3D function:
In this position, bottom resistance, top
resistance, turbo resistance and turbo
fan operate. It is used as alternative for
turbo oven when we want to cook the
bottom and the top better without
mixing the smells to each other.
5
-
Booster mode is just for preheating.
Don't use this mode for cooking proposes.
11 (|
n
)