Beko 4401 - Manual (Page 14)

Operating the oven part
Oven heating controi knob
This knob is used together with the
"function seiection" knob. Select the
desired stage with the "function seiection"
knob. Then rotate the "oven heating
control" knob clockwise. The lamp and
the heating elements in conjuction with
the stage you have selected, or the fan will
come on line. The temperature in the oven
shall be sensed by the thermostat. The
thermostat switches off the heating
element and the thermostat light when the
set temperature level is reached inside the
oven. When the temperature falls below
thermostat comes back on line and the
thermostat light illuminates. This way, the
set temperature level is maintained
throughout the cooking period.
Function selection knob
This knob allows you to select functions
and carry out checks. The functions and
their stages are explained below. In order
to operate the stages, you need to bring
the "function selection" knob together with
the"oven heating control" knob to the
desired temperature degree and adjust
the timer if there is. If your cooker has
timer; refer to the description of timer
usage.
* The kinds of food you want to cook,
Thermostat positions. Shelf positions and
recommended cooking times are given at
the cooking table.
* Bring the knobs to the position you
want.
* Preheat the oven for 10 minutes with
oven door closed.
* Locate the meal you want to cook into
the oven after preheating.
* After cooking, bring the knobs to the “0”
position.
13
3 D function (if available)
Circular heating element and fan runs with
top and bottom heating elements. By
using this function you can cook 3 trays
of food simultaneously with best quality.
Booster function (if available)
1. Adjust the "heating control
knob" to the desired oven temperature.
2. Turn the "function selection knob" to
the booster stage.
3. Your ovens immediately start to operate
and thermostat light will be ON.
4. When the oven reaches to selected
temperature the thermostat light will go OFF.
5. After thermostat light goes off reset the
"function selection knob" to desired oven
cooking mode.
Don't forget that the Booster mode is
just for preheating. Don't use this mode
for cooking proposes.
dS)