Beko 4401 - Manual (Page 5)

Safety precautions and important items
This appliance is not intended for use
by persons {including children) with
reduced pyhsical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of appliance by a person responsible
for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
Before plugging your equipment, be
sure that the tension and the frequence
given on the indicator plate correspond
to your electricity installation.
* Before applying to authorized service,
have the electrical wiring of your home
ready for connection.
* If the current value is less than 16
Amperes please have 16 A fuse with
electrician.
* The ground cable should always be
performed by the manufacturer or its
authorized service agent or a similarly
qualified person. Our company shall not
held responsible for any damage coused
by the utilisation of the oven without ground
cabling.
* While locating your oven; do not squeeze
the supply cord under the oven body or
inside the oven door, because the cable
isolation can be damaged.
* If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in order
to avoid a hazard.
Don’t change the qualifications of this
equipment. It would represent a danger
for you.
^
Verify the general appearance of your
equipment by identifying possible damages
during the transportation.
* In models with the timer:
Always adjust the timer during the first
operation or after any interruptions of the
electric supply. Otherwise, your oven will
not operate.
* Do not attempt to move the appliance by
pulling the door and/or handles.
* Do not forget to remove the packaging
material near the tray and wire grill, and the
polysthrene sticked to the front door glass.
* Whilst the appliance is in use; avoid
touching heating elements inside the oven
as the accessible parts of the appliance
will become very hot.
*
The cooling fan will continue for a
while after switching the oven off.
* Always switch off the appliance from the
mains when the appliance is not in use
before cleaning or in the unlikely event of
any probable product failure.
* Ensure the appliance is switched off
before replacing the lamp, to avoid the
possibility of electric shock.
* In models with Grill;
^Always use oven gloves when removing
the grill rack and dishes from inside the
oven when in use.
*lf, whilst cooking, steam produced comes
into contact with cool surfaces on the
outside of the appliance, it will condense
and produce water droplets.This is quite
normal and is not a fault. Wipe it with a dry
cloth.
4
I
<| n )